Sidney Concrete

Concrete floor installation in Sidney OH - a floor built for what goes on top

Cracked, damp or uneven floor? We pour a new slab on packed ground, with the moisture barrier set for the flooring you plan.

Concrete steps leading from a brick house to a broad gray stamped concrete patio.
  • Fully licensed and insured.
  • Free in-person estimates.
  • Replies within 1 business day.

What does a new concrete floor in Sidney involve?

Concrete floor installation in Sidney, OH, starts with taking out the topsoil and soft spots and packing the ground firm. Then we set a moisture barrier and pour a slab, so your basement, shop or addition gets a level floor that stays put and suits what you'll lay on it.

You might be looking at an old floor that's cracked and uneven, or at bare ground where a floor should be. The price moves with the size of the space, how much soft ground has to come out, how easy it is to get concrete to the spot and the finish you want, and with whether an old slab has to be broken out or opened up with concrete cutting first. The schedule turns on the weather, the flooring you plan to put down and the permit check we do for your address before anything is booked. I'll put all of that in writing at the estimate, along with what the job includes and what it doesn't.

Is concrete floor installation right for your home?

  • Basement with a dirt floor

    A packed, poured slab keeps dust down and gives you a level surface to store on.

  • Old floor cracked or sinking

    If the old slab settled on soft ground, a new one on packed fill fixes the cause.

  • New addition or shed

    A room addition, workshop or shed needs a level slab before walls and flooring can go up.

  • Flooring planned on top

    If tile, wood or a coating is going down later, we plan the slab around it.

How we handle concrete floor installation

Before we pour, I ask what will go on top of the floor, because that decides where the moisture barrier sits and when your flooring can go down. Then our crew digs out the topsoil and any soft spots down to firm ground and packs the subgrade, the soil or stone fill the slab sits on, by rolling, vibrating or tamping it until it doesn't give. We check where water runs around the spot, lay the barrier, set the forms and pour on a day the weather allows. After that we finish the surface to suit what goes on it, cut control joints, which are shallow grooves that give the slab a chosen place to crack, and let it cure, the wait that lets concrete gain strength before it takes weight or a covering. All the way through, we protect your lawn and house and keep the work area tidy.

A new floor often comes with work just outside it. If the room opens onto the yard, we can pour concrete steps up to the door, and if the floor is for a pool house, a concrete pool deck can run from that room to the water. A garage needs its own kind of slab, which our garage floor concrete work covers.

  • A floor that stays bare

    This suits storage rooms, shops and utility spaces, where the slab is the finished floor. We finish it smooth or give it a broom finish, a light brushed texture that adds grip where the floor may get wet.

  • A floor that gets tile, wood or carpet

    This suits finished basements and additions, where the covering is what you'll walk on every day. Here the barrier placement and the wait before flooring go into the plan from the start.

  • A floor that gets a coating

    This suits garages, shops and basements that need an easy-clean surface on the concrete. We finish the slab smooth so the coating has a good surface to bond to, and we set the barrier with that coating in mind.

What happens when you call about a concrete floor in Sidney?

  1. Call or send us a message

    Tell us about the room and what you plan to put on the floor, and we'll set a time to come out. A rough size and a photo help, if you have them.

  2. I walk the space with you

    I come out myself, look at the ground and ask how you plan to use the floor. You get a written estimate of what the job includes and what it doesn't, so you know what the price covers before you decide.

  3. We check permits and schedule

    Once you're ready, we look into the permit side for your address and tell you what we find. Then we book the pour with the weather in mind, since winter work can take extra steps first.

  4. We pour, finish and walk it

    I work alongside our crew on the forming, pouring and finishing. When the floor is done, we walk it with you before we call the job finished.

Choosing a moisture barrier for your concrete floor

Let what goes on top decide it.

The industry's floor and slab guide says floor coverings, coatings and the building get the most protection when the moisture barrier sits right against the slab. That's why I ask about tile, wood, carpet or a coating before we pour, because your answer decides where the barrier goes and when flooring can go down.

The same guide says the plain plastic sheeting used under floors in the past falls short of the full standard for this and shouldn't be considered for it. Please ask which sheet we plan to put under your floor. I'll name it at the estimate, so you know what's going under the concrete before it's poured.

Take a look through these examples of concrete floors, patios, steps and driveways to get a feel for finishes and layouts before we talk.

Get a written estimate for your new concrete floor

Please tell us the room, the flooring planned on top, your hoped-for season and whether you're inside Sidney city limits. We reply within one business day to set a free, no-obligation visit at your home.

Why Sidney homeowners call Sidney Concrete for a new floor

  • I'm at every estimate and pour

    I come out to look at every job myself, and I work alongside our crew on the forming, pouring and finishing. So the person who heard what you want on top of the floor is the one standing there at the pour.

  • Fully licensed and insured

    Sidney Concrete is fully licensed and insured. The city also registers contractors for all of Shelby County, so you can ask it about any crew you're thinking of hiring.

  • Since 2023, at lived-in homes

    I learned the trade pouring slabs on new construction and started this business in 2023 to do that same careful work at homes where families already live. We protect the lawn and the house and keep the work area tidy, so the only change you notice when we leave is the new floor.

  • Honest answers before the pour

    At the estimate, I'll tell you plainly that a few small cracks are normal and that some flooring has to wait, because satisfaction guaranteed starts with an honest expectation. When you're ready, please call (937) 658-9414 or send us a message.

Questions about new concrete floors

Will a new concrete floor crack?

Some small, random cracks should be expected in any new slab, even with joints cut close together, and reinforcement won't prevent them. When rebar, the steel set inside a slab, is sized and placed right, it keeps those cracks tight, so a floor is fairly judged by how tight its cracks stay. I'd rather tell you that at the estimate than promise a floor that never cracks.

How long does a new concrete floor need before flooring goes down?

Some floor coverings may have to wait months after the pour, because a slab normally curls a little at its joints as it dries, and that can cause trouble laying them. If you're planning tile, wood or a coating, please build those months into your schedule. When curling matters more than usual, the joint spacing, mix and joint details should be carefully worked out, and you're welcome to ask me how we set them.

Can you pour a concrete floor in winter in Sidney, OH?

A winter pour can work, as long as the ground under the slab is thawed first. One trade group's cold weather guide says that ground must be at least 40°F and within 20°F of the concrete temperature, which in a Sidney winter can mean ground heaters or blankets before the pour. The same guide says to cover new concrete right away with insulated blankets, straw or heated enclosures to keep it at 50°F or above for at least 3 days, so plan for that covered time.

Where do I get a permit for a concrete floor outside Sidney city limits?

Homes outside the City of Sidney go through the Shelby / Miami County Building Department, which also handles commercial and industrial building permits, at 937-658-6220 or 937-440-8121. The city's online permit portal only covers permits inside the city. If you're not sure which side of the line your home is on, give us your address and we'll find out.

How much does it cost to install a concrete floor in Sidney?

There's no set price, because I price each floor at the estimate after I've seen the ground and the space. The biggest swings come from how much soft ground and fill the base needs, the moisture barrier for what's going on top, and winter steps like thawing the ground and covering the pour. If the budget is tight, I'd rather you save on the finish than on the base, because the base is hidden on day one but it's what keeps the floor from settling.

What causes a concrete floor to sink or settle?

Usually it's the ground underneath, when topsoil or soft spots are left in or the base is raked level instead of packed, so the slab settles as the dirt does. Water running toward the slab and joints cut late or skipped cause their own trouble, with cracks in places nobody chose. That's why the digging and packing described above come before anything else on our jobs.

Ready to plan your new concrete floor?

Ask for an estimate and I'll come out, look at the space and put in writing what the job includes.

Concrete floor installation in Sidney: permits and local ground

The City of Sidney's permit list names new buildings, additions, renovations, decks, pools, fences, signs and site improvements, and it doesn't name concrete floors, so the list alone doesn't settle whether your floor needs one. If the floor is part of a room addition, shed or detached garage, that work is on the list, and the city also handles the inspections for it. The city asks anyone who isn't sure to call the city at 937-498-8130, and most Sidney permits need building plans and a to-scale site plan of the property at a minimum. Before we schedule, we check which office covers your address and tell you what we find. When a permit is needed, we take care of the application or help you with the parts that need your signature, and homes outside city limits go to the county building department instead.

We're based in Sidney and work across Shelby County and the cities around it. Ground can change from one yard to the next here, so we dig until we reach firm soil instead of stopping at a set depth, and we see the same cold winters on jobs in Piqua and Troy, which is why the season goes into every plan. If you don't see your city listed, please ask us.